Concrete mixing plant leakage how to deal with

Concrete mixing plant as a production of concrete mixing equipment, is the road construction, construction of indispensable mixing equipment, its safe and smooth operation is related to the progress of the entire project and the safety of construction workers. But any kind of machinery and equipment in the course of the operation will inevitably encounter some unexpected events, including power, leakage, damage to parts and so on, for concrete mixing station such a large equipment, the leakage phenomenon has occurred , Once the problem, how to solve it?

1, to determine whether the line is really leakage.

You can use the megger to shake the size of the line insulation resistance, or in the total knife gate connected to a ammeter, without opening the equipment under the premise of all the mixing station equipment, if the ammeter pointer swing, then the line leakage.

2, to determine the phase line and zero line leakage or phase line and earth leakage, or both. If the ammeter indication is zero, it is between the phase line and the zero line leakage; if the ammeter indication becomes smaller but not zero, then the current meter indication is zero, Said both.

3, determine the leakage range.

Remove the split fuse or pull the knife, if the ammeter indicates the same, it is the bus leakage; if the ammeter indicates zero, it is shunt leakage; if the ammeter indication becomes smaller but not zero, then the bus, Road are leakage.

4, find the leakage point.

After the inspection of the above concrete mixing station line, and then opened the switch in turn the line lamps. When a switch is opened, if the ammeter indicates zero return, it is the branch line leakage, if the ammeter indication becomes smaller, then that in addition to the branch line leakage, there are other leakage. Or use the pencil test can also be used. In turn to narrow the scope of the search, you can find the leakage point.
www.t-batching-plant.com