Concrete mixingstation (www.zzxfjxwm.com) is divided into four parts: gravel feed, powder (cement, fly ash,
bulking agents, etc.) to feed, water and feed additives, transmission and
storage stirred their workflow mixer control systems after
power-up, enter the human - machine interface dialogue system initialization
process, including recipe number, grade concrete slump, producers, etc.
according to the amount of weight for each hopper, metering hopper to detect
the output material empty. or
material full signal, prompting the operator to determine whether to activate
the control program starts stirring sand, stone belt motor fed into the
metering hopper; open fly ash, cement tank valve, start the electromechanical
screw conveyor ash and cement into the metering hopper ;
the control valve is opened and water storage pool water additives and
admixtures metered into the metering hopper to meet the set requirements doo
door open metering, mixing the ingredients into the mixer within already started
to set time doors open mixer. concrete
has splice into the mixer.
1. The respective cylinders, control valves and motors by concrete mixing processes required to run each cylinder, control valve and the motor must be accurate, stable and reliable.
2 control system with automatic or manual mode, and the relationship between each other is independent and restrict each other.
3 system with a good anti-jamming capability and improve the self-protection alarm.
4 through communication with the computer, it can display system status, fault alarm.
1. The respective cylinders, control valves and motors by concrete mixing processes required to run each cylinder, control valve and the motor must be accurate, stable and reliable.
2 control system with automatic or manual mode, and the relationship between each other is independent and restrict each other.
3 system with a good anti-jamming capability and improve the self-protection alarm.
4 through communication with the computer, it can display system status, fault alarm.
没有评论:
发表评论